River Pebble Crushing Plant Solution
Material-based crushing, screening and optional shaping reference for river pebbles.

Solution Overview
A process reference for hard, rounded river pebbles, with staged crushing, screening and optional shaping or washing according to the finished product requirements.
Process Flow Diagram
- 01FeedingA feeder controls the supply of sorted river pebbles to the crushing line.
- 02Primary ReductionA jaw crusher may be used when the incoming stone size requires primary reduction.
- 03Secondary CrushingCone crushing is commonly considered for hard rounded pebbles.
- 04Shaping & ScreeningA VSI stage may be added for particle shape or manufactured sand, followed by screening.
- 05Optional WashingWashing and fine-sand recovery can be considered when cleanliness and fines control are required.
Equipment Groups to Evaluate
| Process | Equipment Type | Selection Notes |
|---|---|---|
| Feeding | Vibrating feeder | Selected according to feed size and line capacity. |
| Primary reduction | Jaw crusher (if required) | Use depends on the incoming pebble size. |
| Secondary crushing | Cone crusher | Evaluated for hard, rounded material. |
| Optional shaping | VSI sand maker | Consider when improved particle shape or sand production is needed. |
| Classification / washing | Vibrating screen and sand washer | Final arrangement depends on grading and cleanliness targets. |
Finished Product Sizes & Grading
A screening circuit can separate material into several finished size fractions. The number of products and each size range depend on the customer specification, screen deck arrangement, feed characteristics and circulating load.
Share the target grading (for example, the required number of aggregate fractions and their size ranges) so the process and screen configuration can be reviewed. No fixed output sizes or capacities are assumed on this reference page.
Related Project Cases
This is a preliminary material-based process reference, not a confirmed project quotation. Final equipment models, quantities, capacity and finished product fractions must be checked against the actual feed material, feed size, site conditions and customer grading requirements.
Discuss This Solution
Share your material, feed size, target capacity and required output sizes.