Concrete Recycling Plant Solution
Process reference for concrete and selected construction and demolition waste recycling.

Solution Overview
A construction and demolition waste processing reference covering pre-sorting, crushing, screening and metal separation where required by the incoming material.
Process Flow Diagram
- 01Pre-sortingRemove unsuitable oversized objects and identify reinforcement or contaminants before crushing.
- 02Primary CrushingSelect a crusher suitable for the incoming concrete size and reinforcement conditions.
- 03Metal SeparationMagnetic separation may be used to remove ferrous reinforcement from the material stream.
- 04ScreeningScreen the crushed material into recycled aggregate fractions according to the intended reuse.
- 05Conveying & StockpilingTransfer and stockpile separated material while managing dust and site safety.
Equipment Groups to Evaluate
| Process | Equipment Type | Selection Notes |
|---|---|---|
| Pre-sorting | Sorting and feeding equipment | Scope depends on the incoming waste stream and contamination. |
| Crushing | Jaw crusher or impact crusher | Selection depends on concrete size, reinforcement and target recycled aggregate. |
| Metal separation | Magnetic separator | Used when ferrous reinforcement needs to be removed. |
| Classification | Vibrating screen | Deck layout follows the intended recycled aggregate fractions. |
| Material handling | Belt conveyors | Layout includes safe transfer and stockpile arrangements. |
Finished Product Sizes & Grading
A screening circuit can separate material into several finished size fractions. The number of products and each size range depend on the customer specification, screen deck arrangement, feed characteristics and circulating load.
Share the target grading (for example, the required number of aggregate fractions and their size ranges) so the process and screen configuration can be reviewed. No fixed output sizes or capacities are assumed on this reference page.
This is a preliminary material-based process reference, not a confirmed project quotation. Final equipment models, quantities, capacity and finished product fractions must be checked against the actual feed material, feed size, site conditions and customer grading requirements.
Discuss This Solution
Share your material, feed size, target capacity and required output sizes.